Laser Tag Vest

Laser Tag Vest

Laser Tag Vest is a hit sensor device that can be used with or without the Laser Tag Headband.

The vest has 8 hit sensors: 4 on the front, 2 on the back and 2 on the shoulders (1 on each shoulder).

The most interesting feature of using the Laser Tag Vest with Headband is that you can use the factor of damage reduction for one of the hit devices.

For example, hitting the body in military simulation usually means wounding, that's why you can set damage factor to be lower than for hitting the vest compared to the damage factor for hitting the headband. In this case, the player that was hit to his vest does not get a full damage, but only part of it. Changing the damage coefficient can be made using the "Laser Tag Configurator" in "Additional Equipment".

To do this, start the Laser Tag Configurator, turn on the vest, wait while it connects to the PC. Select damage factor in the Laser Tag Configurator (0.2 / 0.4 / 0.6 / 0.8 / 1.0) and click "Record". The recording of damage factor parameters will be accompanied with short beeps, the amount of which will depend on the selected factor - 1/2/3/4/5 respectively.

You can buy Laser Tag Vests in our online store.

Laser Tag Vests

How to connect the Laser Tag Vest with the Laser Tag Gun

- Vest and Gun (no Headband)

1. Turn on the gun.
2. Turn on the vest.
3. Wait for their connection (Vest will beep, followed by flashes and vibro-indication).
4. Activate your set with the remote control or MedKit devices.

- Headband + Vest and Gun

1. Turn on the gun.
2. Turn on the vest.
3. Turn on the headband.
4. Wait for their connection. (Vest and headband will beep, followed by flashes and vibro-indication)
5. Activate your set with the remote control kit or MedKit devices.

- Vest and 2 Guns

1. Turn on the first gun.
2. Turn on the laser tag vest.
3. Wait for their connection.
4. Turn on the second gun.
5. Wait for its connection with the vest (after a short vibro signal will disappear).
6. Activate your set with the remote control kit or MedKit devices.

- Headband + Vest and 2 Guns

1. Turn on the first gun.
2. Turn on the vest.
3. Turn the first switch on the headband.
4. Wait for their connection.
5. Turn on the second gun.
6. Turn on the second switch on the headband.
7. Wait for their connection (single sound and vibro-indication of the headband).
8. Activate your set with the remote control kit or MedKit devices.